Skip to content
Quality manager reviewing the correct document revision at a manufacturing workstation using Doc-Trak
Defense and Regulated Manufacturing · Infor SyteLine

Can You Prove These Parts Were Good?

Certs live on a whiteboard, and audits take two weeks. For defense suppliers and regulated manufacturers, the audit question is always the same, and the answer is usually spread across binders, spreadsheets and email. The Lake MES Platform keeps the quality record, the document in force and the labor record with the job in SyteLine, so the evidence is there when your auditor or your prime asks for it.

1,000+ manufacturers served since 1983 | 650+ running Lake software today | Infor Gold Channel Partner

The Problem

Compliance gaps in defense manufacturing don’t stay hidden.

Most manufacturers find their gaps during an audit, a contract review or a prime's supplier questionnaire. That's the moment when there's no time left to fix them.

Audit evidence takes weeks to assemble

When an auditor asks for every nonconformance on a part number and what you did about each one, most shops rebuild the answer from spreadsheets, email and paper travelers. That work lands on the quality manager, usually in the weeks before the audit.

The drawing at the station may not be the current one

If an operator builds from a drawing that was revised last week, the problem starts at the operation. You find out at inspection, or your customer finds it for you.

Corrective actions live outside the system

A corrective action tracked in a spreadsheet has no link to the job, the part or the engineering change that closed it. When the same defect comes back, nobody can show what was done the first time.

Flow-down requirements keep growing

Primes flow their quality requirements down to every tier, and each new contract adds to what you have to show. Every requirement you meet by hand is another binder to keep current.

How It Works

From the document at the station to the corrective action that closes the loop

Each step below is a product on the Lake MES Platform. Your records stay in SyteLine, where your auditor can find them.

1

The right document at the operation

Doc-Trak attaches drawings, work instructions and certificates to the SyteLine record they belong to: the item, the job, the operation, the lot or the serial number. The drawing at the station is the one attached to the job. With setup, operators see only the current revision.

Operators see: the drawing and work instruction for the job in front of them
2

Labor and scrap recorded on the job

Shop-Trak runs alongside SyteLine. It posts labor, quantities and scrap with a reason code to the job as the work happens.

Supervisors see: who worked the job, what was made and what was scrapped, and why
3

Nonconformance to corrective action to engineering change

Quality-Trak runs inside SyteLine. A nonconformance report (NCR) opens a corrective and preventive action (CAPA) when it needs one, and an engineering change order (ECO) carries the fix into the item and the routing. Document numbers are sequential and can't be keyed over. A record is voided, never deleted.

Quality Managers see: each nonconformance, what was done about it and the change that closed it
4

Audits, complaints and inspections on the record

Quality-Trak records internal audits, customer complaints and inspections (dimensional, torque, checklist, attribute and serial) on the same SyteLine database. Pareto analysis shows where defects cluster by cause and by risk category.

Quality leads see: the defects worth fixing first
5

The evidence when it's asked for

Because the records are in SyteLine, the answer to an audit question comes from a Quality-Trak report or a SyteLine search. You don't have to rebuild it from binders.

Auditors see: the record, with its history

Shop-Trak, Doc-Trak and Fact-Trak already work on your SyteLine data today. The next direct product-to-product integration, Shop-Trak and Machine-Trak, is expected by the end of 2026, with more through 2027.

Planned 2027: recording quality results from the Shop-Trak screen.

Your industry has a specific compliance lens. We know it.

Six regulated verticals, each with its own audit surface, flow-down requirements, and product fit.

The partner behind the platform

1000+ 
Manufacturers served since 1983
650+
Running Lake software today
Infor Gold Resell Partner | reverse logo, vector
For Infor CloudSuite Industrial and Infor SyteLine

Each part of the problem has a product on the platform

What working with us looks like

We start with your audit cycle and your SyteLine setup, then propose a defined scope. We don't quote implementation timelines on a web page. We'd rather look at your operation first.

1
 
How it starts

A 30-minute working session. We walk through your SyteLine version, the Lake products you run today, how you keep quality records and controlled documents, and what your prime or your audit cycle asks of you. We tell you what the platform will and won't do for your situation. If we're a fit, we propose a defined scope with named milestones. If we're not, we tell you that too.

2
 
ITAR and GovCloud requirements

If your work is subject to ITAR, or you run SyteLine in Infor's GovCloud, tell us at the start. We ask about ITAR and GovCloud requirements before a deployment model is chosen, so the products are installed where your contracts allow.

3
 
What to have ready
  • Your SyteLine version and where it runs
  • The Lake products you run today
  • Where your quality records and controlled documents live today
  • The requirements your primes flow down to you
  • Contracts subject to ITAR or EAR controls
  • Contacts for IT, operations, and quality
4
 
Activation and training
When you activate a product, we install and configure it and train your administrator. Your administrator then trains your users in the context of your own processes.
Questions we hear the most

Real questions from defense and regulated manufacturers

Still have questions?

Talk to someone who's run these implementations.

Talk to an Expert →
Do we have to move SyteLine to use the platform?

No. You add platform products to the SyteLine you run today. Your account team will confirm what your version supports.

Is Quality-Trak certified for AS9100 or ISO 9001?

Standards like AS9100 and ISO 9001 certify your quality management system, not a piece of software. Quality-Trak records the nonconformances, corrective actions, engineering changes and internal audits those audits review.

How do we know operators are building from the current drawing? The drawing at the station is the one attached to the job in SyteLine. With setup, Doc-Trak shows operators only the current revision.
Can we see the history behind a quality record? Yes. Quality-Trak document numbers are sequential and can't be keyed over, and records are voided, never deleted. The record shows who did what and when.
Does Quality-Trak include gage calibration?

Quality-Trak does not include gage calibration.

We have ITAR-controlled work. Does that change anything?

It changes where the products can be installed. We ask about ITAR and GovCloud requirements before a deployment model is chosen, and your account team plans the installation around them.

Ready to understand your actual compliance posture?

Ready to Talk
Start with a working session on your SyteLine setup, your quality records and what your primes ask of you. We'll tell you what the platform will and won't do for your situation.
The Bigger Picture

Part of the Lake MES Platform

SyteLine is your system of record. The Lake MES Platform is your system of execution. Shop-Trak, Doc-Trak and Fact-Trak already work on your SyteLine data today. The next direct product-to-product integration, Shop-Trak and Machine-Trak, is expected by the end of 2026, with more through 2027.

Quality-Trak
Catch it at the operation, not the dock.
Doc-Trak
The right document finds the work.
Shop-Trak
Capture the work. Validate it. Post it.